First Time Installation - Usb Connections; Aerial Installation; Cable Installation - Salora 24LED8100CS Bedienungsanleitung

Getting Started

First Time Installation - USB Connections

Switching On/Off
To Switch the TV On
Connect the power cord to the 220-240V AC, 50 Hz.
To switch on the TV from standby mode either:
Press the " " button, P+ P- or a numeric button on the
remote control.
Press the side function switch until the TV comes on
from standby.
To Switch the TV Off
Press the " " button on the remote control or press
the side function switch until the TV switches into
standby mode.
To power down the TV completely, unplug the
power cord from the mains socket.
Note: When the TV is switched to standby mode, the standby LED
can blink to indicate that features such as Standby Search, Over
Air Download or Timer is active. The LED can also blink when you
switch on the TV from standby mode.
First Time Installation
When turned on for the first time, the language selection
screen is displayed. Select the desired language and
press OK.
The First Time Installation (FTI) screen will be displayed
next. Set your preferences using the navigation buttons
and when finished, press OK to continue.
You can activate Store mode option to be available in
"Other settings" menu and your TV's features will be
illustrated on the top of the screen. a confirmation screen
will be displayed. Select YES to proceed.
If Home Mode is selected, Store mode will not be
available after the First Time Installation. Press OK
button to continue.

Aerial Installation

If you select AERIAL option from the Search Type screen,
the television will search for digital terrestrial TV broadcasts.
NOTE: You can press MENU button to cancel.
After all the available stations are stored, the Channel
List will be displayed on the screen. If you like how the
channels are sorted according to the LCN (*), please
select "Yes" and than press OK.
Press MENU button to quit channel list and watch TV.
(*) LCN is the Logical Channel Number system that
organizes available broadcasts in accordance with a
recognizable channel sequence (if available).

Cable Installation

If you select CABLE option and press OK button on
the remote control. To continue, please select YES and
press OK. To cancel operation, select NO and press
OK. You can select frequency ranges from this screen.
Enter the frequency range manually by using the
numeric button.
Note: Searching duration will change depending on
the selected search step.
Media Playback via USB Input
You can connect a 2.5" and 3.5" inch (hdd with
external power supply) external hard disk drives
or USB memory stick to your TV by using the USB
inputs of the TV.
IMPORTANT! Back up your files before making
any connections to the TV. Manufacturer will not be
responsible for any file damage or data loss. Certain
types of USB devices (e.g. MP3 Players) or USB hard
disk drives/memory sticks may not be compatible
with this TV. The TV supports FAT32 and NTFS disk
formatting but recording will not be available with NTFS
formatted disks.
While formatting a USB hard disk that has 1TB (Tera
Byte) or more file capacity, you can experience
problems with the formatting process. Do not repeatedly
quickly plug and unplug the drive. This may cause
physical damage to the USB player and USB device
itself. Do not pull out USB module while playing a file.
Quick Menu
The Quick Settings menu allows you to access some
options quickly. This menu includes Power Save Mode,
Picture Mode, Equalizer Settings, Favourites, Sleep
Timer, FollowMe TV (optional) and Information booklet
(optional) options. Press Q.MENU button on the remote
control to view the quick menu. See the following chapters
for details of the listed features.
FollowMe TV (optional)
With your tablet you can stream the current broadcast
from your smart TV using the FollowMe TV feature.
Install the appropriate application to your tablet PC. Start
the application.
For further information on using this feature refer to the
instructions of the application you use.
E-Manual
You can find instructions for your TV's features in the
E-Manual.
To use E-Manual, press to the Info button while main
menu is displayed on the screen.
By using the navigation buttons select a desired category.
Every category includes a different topics. Select a topic
and press OK to read instructions.
To close the E-Manual screen press the Exit button.
Note: The contents of the E-Manual may vary according
to model.
English - 31 -