Seite 1
INSTRUCTIONS FOR INSTALLATION AND USE MONTAGE- UND GEBRAUCHSANWEISUNG INSTRUCTIONS POUR L'INSTALLATION ET L’UTILISATION ISTRUZIONI PER L'INSTALLAZIONE E L’USO INSTRUCCIONES PARA INSTALACIÓN Y USO INSTRUÇÕES DE INSTALAÇÃO Y UTILIZAÇÃO AANWIJZING VOOR GEBRUIK EN INSTALLATIE...
Seite 3
polyurethane filter too. Panel type synthetic filter (of the type shown in Fig. 20P): this filter is made of white synthetic fibres and is located inside the metal grid; it cannot be cleaned, but must be replaced from time to time according to use (at least every two months). If the synthetic filter is not totally white, but has got coloured parts (stripes or spots), this means it is a saturation detector filter, it should therefore be changed when the coloured parts can be seen from the outside or the apparatus.
Seite 4
einer Drehbewegung einrasten lassen. Filterpaneel aus Polyurethan (Abb. 15 P); um dieses zu montieren, muss es im Inneren des Gitters positioniert und mit Hilfe der mitgelieferten Filterklemmen aus Metall befestigt werden (Abb. 15 Q). Für den Abluftbetrieb ist ein flexibles Rohr an den Geräteflansch anzuschließen und zur vorgebohrten Abluftöffnung zu führen;...