Maintenance; Precautions For Use - Farfalla SILENT Anleitung

You are advised to change frequently the water in the tank and clean the diffuser once or twice a week, particularly if you
want to change the fragrance to be diffused.
1. Turn the appliance off and unplug it.
2. Remove the cover and pour the water into the tank. Empty the water with the help of the water spout, in front
of the air outlet. Do not empty the water in the air outlet, this would damage the diffuser.
3. Clean the inside of the diffuser with a soft damp cloth and a little water. If needed, use a little white vinegar
strongly diluted. Do not use corrosive detergents. Carefully rub the ceramic disc with a cotton bud being careful
about not to scratch it.
A detailed diagram of the components is available on the last page.
1. Place the diffuser on a flat and stable surface, away from the edge.
2. Remove the diffuser's cover.
3. Pour mineral water (bottled or tap water) into the water tank up to the maximum level indicated – 300ml.
4. Then add a few drops of essential oils (3-6 drops) to the water tank.
5. Replace the cover on the diffuser.
6. Insert the adaptor's connector into the DC jack input at the back side of the diffuser.
7. Plug the adaptor into the outlet.

MAINTENANCE

PRECAUTIONS FOR USE

8