Maintenance; Waste Management; General Description - GYS Powerduction Heat Controler Originalbetriebsanleitung

Translation of the original instructions

GENERAL DESCRIPTION

The Powerduction Heat Controller is an intelligent box that acts like a thermostat on the Powerduction 110/160LG. It
regulates the temperature of the part to be heated between 80°C and 350°C.
POWERDUCTION CONNECTION
1. Disconnect the pedal from the Powerduction and then connect it to the Powerduction Heat Controller.
2. Connect the product cable to the front panel of the Powerduction.
3. The Powerduction Heat Controller is connected. Select an operating mode.
12
POWERDUCTION HEAT CONTROLER

Maintenance:

• If the power cable is damaged, it must be replaced by the manu-
facturer, its after sales service or an equally qualified person to
prevent danger.
• Warning! Always disconnect from the mains before performing
maintenance on the device. High Voltage and Currents inside
the machine.
• Remove the casing on a regular basis, to remove any excess
dust. Take this opportunity to have the electrical connections
checked by a qualified person, with an insulated tool.
• Do not use solvents or any agressive cleaning products.
• Clean the device's surfaces with a dry cloth.
Regulations:
• Device complies with europeans directives.
• The certificate of compliance is available on our website.
• EAC Conformity marking (Eurasian Economic Community).

Waste management:

• This product should be disposed of at an appropriate recycling
facility. Do not throw away in a domestic bin.
• The product's manufacturer contributes to the recycling of its
packaging by contributing to a global recycling system.
• This product should be recycled appropriately
EN