Herunterladen Diese Seite drucken

Adata XPG PRIMER Bedienungsanleitung Seite 3

Werbung

清潔指南
使用沾濕乾淨抹布擦拭本產品以清潔表面,為保持產品的完整性,請勿使用肥皂或其他清潔用品。
安全須知
為確保使用安全,使用本產品時請遵循以下說明:
1.
將產品遠離液體、過重濕氣或潮濕處以避免意外觸電,若意外碰觸到液體,請務必立即拔除電
線,置放於乾燥處並連絡客服人員尋求進一步的協助。
2.
產品建議使用溫度範圍為0°C (32°F) to 40°C (104°F),若溫度超過建議範圍請立即拔除電線
並關上電源以讓產品維持穩定。
3.
若在操作過程中遇到問題且無法排除故障,請拔除插頭並連絡客服人員尋求進一步的協助。
4.
請勿嘗試自行維修本產品。
保固期限
除非地方法律與條款另有規定,針對本產品威剛科技提供二年保固。
產品保固聲明
此保固聲明僅針對威剛科技與合作夥伴生產、製造的產品進行維修或換貨本保固聲明不適用於以
下項目:
1.
保固標籤或防拆標籤被更改、破損或遺失時。
2.
產品序號不符或破損不清楚時
3.
透過非威剛授權之經銷管道購買的產品
4.
天災造成的損壞
5.
因人為不當操作造成損壞
線上客服
常見問題、更多資訊與服務指導請參考官方網站 www.xpg.com
TC
12
CLEANING INSTRUCTIONS
Please use a clean damp cloth to clean the product properly.
Do not apply any soap or solvent agent on the surface to preserve its integrity.
SAFETY INSTRUCTIONS
For a proper use of the product, and to ensure your safety, please follow the following
instructions:
1.
Keep the device away from liquids, excess humidity or moisture to avoid any shock
hazards. Should the device come into contact with liquids, please make sure to unplug the
device immediately, store it in a dry place, and contact support for assistance.
2.
Operate the device only within the specific temperature range of 0°C (32°F) to 40°C
(104°F). Should the temperature exceed this range, unplug and/or switch off the device in
order to let the temperature stabilize to an optimal level.
3.
Should you have any other trouble operating the device properly and normal
troubleshooting does not work, please unplug the device and contact our service for
support.
4.
Do not attempt to service or fix the device by yourself at any time.
DURATION OF WARRANTY
ADATA Technology Co., Ltd. provides a 2 year warranty period for this product unless
regional laws and regulations state otherwise.
LIMITATION OF WARRANTY
This limited warranty covers only repairs or replacements of products manufactured by
ADATA Technology Co. Ltd. and its authorized partners.
Please note that ADATA is responsible for providing free repairs except for the following
reasons:
1.
The warranty label is altered, damaged or missing.
2.
Product serial number does not conform to our original system.
3.
Products purchased from an unauthorized agent.
4.
Damage caused by natural calamity
Any abuse outside the intended product operation.
5.
ONLINE CUSTOMER SERVICE
For frequently asked questions, additional information and service instruction
please visit the product page at www.xpg.com
EN
01

Werbung

loading