Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Do not overtighten the screw and
make sure the control arm and
linkages are working smoothly.
Cockpit
v911_500016_RC_4_Channel_Helicopter_Manual_2013.indd 19
Downloaded from
www.Manualslib.com
Approx. 1 mm
manuals search engine
Screw
T 1.2x5.5 mm
Please tighten with suitable force, as
overtighten will cause deformation of
the head block.
Stable ight: inner hole A
Nimble ight: outer hole B
Tail rotor blades rotate in a certain
direction. Please observe rotating
Direction of rotation
direction if you replace the tail rotor
blade.
Main gear is designed to x onto
main shaft without screw. When
pressing main gear onto main shaft,
match the at spot on the main
shaft and press all the way in to
ensure the correct position.
04.03.2013 08:23:18
Werbung
