Installation - Black+Decker BXEFD41E Originalanweisungen

Use and care:
Š Fully unroll the appliance's power cable before each use.
Š Do not use the appliance if the on/off switch does not
work.
Š Use the appliance handle/s, to catch it or move it.
Š Do not use the appliance if it is tipped up and do not turn
it over.
Š Do not turn the appliance over while it is in use or
connected to the mains.
Š Disconnect the appliance from the mains when not in
use and before undertaking any cleaning task.
Š Store this appliance out of reach of children and/or
persons with physical, sensory or reduced mental or lack
of experience and knowledge.
Š Make sure that dust, dirt or other foreign objects do not
block the fan grill on the appliance.
Š Keep the appliance in good condition. Check that the
moving parts are not misaligned or jammed and make
sure there are no broken parts or anomalies that may
prevent the appliance from operating correctly.
Š Never leave the appliance connected and unattended if
is not in use. This saves energy and prolongs the life of
the appliance.
Service:
Š Any misuse or failure to follow the instructions for use
renders the guarantee and the manufacturer's liability
null and void.
DESCRIPTION
A Front Grill
B Propeller fastening nut
C Propeller
D Grill fastening nut
E Rear Grill
F Motor shaft
G Motor housing
H Oscillation knob
I Front motor housing
J Speed buttons
K Security screw
L Table Stand
M Adjustable Height knob *
N Adjustable Height Column *
O Fan base cover*
P Cross base *
(*) Only available in BXEFP40E and BXEFP41E models.
(Original instructions)
If the model of your appliance does not have the
accessories described above, they can also be bought
separately from the Technical Assistance Service.

INSTALLATION

Š Be sure to remove all packaging material from inside the
appliance.
Š Ensure that the fan is switched off from the supply mains
before start any installation or assembly operation.
Š The appliance should be used with its base fitted.
Assembling the base (ONLY FOR DESK
FANS):
Š To fix the base into the appliance, place the appliance
face down.
Š Fit the base on the main body of the appliance.
Š Fix the base using the screws provided.
Š Stand the appliance up again so as to check that the
base works properly.
ASSEMBLING THE BASE FEET (ONLY FOR
STAND FANS):
Š The appliance has an anti-slip base feet that support the
product.
Š Position the base feet on the body of the appliance using
the screws. (Provided with the appliance). (Fig.1)
Š Stand the appliance up again so as to check that the
base feet work properly.
Assembling the grill and the propeller:
Š Fit the rear grill (E) on the motor housing (G), matching
their fitting points.
Š Tight the grill nut (D) that attaches the grill, Make sure of
a correct setting.
Š Fit the propeller (C) on the motor shaft (F).
Š Tight the nut (B) that attaches the propeller, Make sure
of a correct setting.
Š Fit the front grill (A) front the rear grill (E), matching
the security screw position. Fix the front grill by using
the hooks and tight the security screw (K) by using a
screwdriver.
Š Check the correct rotation of the propeller.
INSTRUCTIONS FOR USE
Before use:
Š Make sure that all products' packaging has been
removed.
ENGLISH
5