Technical Information; Service Address - Vasner Ventury S Bedienungsanleitung

Standventilator

Vorschau ausblenden

Inhaltsverzeichnis

Verfügbare Sprachen

VASNER

0 = Off

1 = Low

2 = Medium

3 = High

5. If you would like to control the oscillation function, pull or push the knob

(2) on the top of the fan head. You can activate / deactivate this function

anytime during use of the fan.

Cleaning, maintenance, service and disposal

Cleaning

•

Always unplug the fan before cleaning it.

•

For hygienic reasons, you should clean the fan regularly. During long peri-

ods of non-use, it may gather dust. Use a damp cloth or compressed air to

clean the fan. Do not use a wet, dripping cloth.

•

If the fan will not be used for a longer period of time, switch it off and dis-

connect the power cord from the outlet completely.

•

To avoid damaging the lacquer finish, do not use any abrasive cleaning

agents or chemicals.

Maintenance

In general, the VASNER Ventury S does not require any maintenance. The fan

must not be opened by unauthorised persons! If there seems to be a problem,

contact your dealer.

Service and repair

If you notice any defects or damages to your Ventury S, it must be checked

and repaired by a specialist. This may be a qualified electrician or your dealer.

Damage or faults arising from unauthorised repairs, as well as modifications to

the fan, misuse, negligence, and improper or inadequate maintenance void the

warranty. Dealers and the manufacturer shall not be liable.

Disposal

The VASNER Ventury S must not be disposed of together with your normal

household waste. Please take the fan to your local recycling centre to dispose of

it.