kronings K3600-50 Betriebsanleitung Seite 21

•
THE REMOTE CONTROL WILL ONLY OPERATE IF DIRECTLY
POINTED AT THE PLENUM. It will beep once when the signal is received.
Adjust the distance and angle if the plenum does not respond.
•
The unit will blow cold air in COOL mode and hot air in HEAT mode.
•
When the unit is on, press the "DISPLAY" key on the remote control to
display on the plenum.
•
The air-conditioner features power cut memory and automatic resets after
restarting.
•
Low temperature heating will cause frosting, during which it is normal to
show "DF" on the plenum.
•
When the outside temperature is lower than 0 degrees, the heating effect
is reduced. Adopt alternative methods of heating.
•
If the device is to be left unused for an extended period, remove the
batteries from the remote control.
Operation instruction
20