Varyscan MICRO 150HTI 1. Einleitung 1.1 Allgemeines Der Varyscan MICRO 150HTI verfügt über 7 Farben plus weiß, 10 Gobos davon sind 2 auswechselbar, Farbradrotation in verschiedenen Geschwindigkeiten und einen Highspeed Shutter. Die Achsen X und Y(Pan&Tilt) können mit 8Bit oder 16Bit angesteuert werden, abhängig vom eingesetzten Controller.
2.3 Montage der Geräte ACHTUNG: Mindestens 1m Abstand zu brennbaren Gegenständen ! Varyscan immer mit Sicherungsseil zusätzlich sichern ! Der Varyscan MICRO 150HTI kann auf den Boden gestellt, oder an den dafür vorgesehenen Befestigungslöchern an die Decke oder Traversen montiert werden.
Benutzen Sie das Gerät nur im komplett zusammengebauten Zustand, damit keine elektrischen Bauteile berührt werden können. (Lebensgefahr 5000V) Wenn Sie die aufgeführten Punkte beachtet haben, können Sie die Geräte einstecken, oder von einem Fachmann an das Netz anschließen lassen. JB-lighting Lichtanlagentechnik GmbH Sallersteigweg 15 D-89134 Blaustein 07304-9617-0...
6 Kanäle. Wenn das erste Gerät auf Startadresse 1 eingestellt ist, dann ist der nächste freie DMX-Kanal demnach der siebte. Doppelbelegungen der Kanäle sind zu vermeiden. Einstellungen der ersten 12 Varyscan beim 6-Kanal Betrieb. (8-Bit) Varyscan Nr. DMX-Adresse JB-lighting Lichtanlagentechnik GmbH Sallersteigweg 15 D-89134 Blaustein 07304-9617-0...
Sie dann das neue Gobo. Wenn Sie eigene Gobos herstellen lassen wollen, beachten Sie bitte folgende Zeichnung. Nutzdurchmesser: (Platz für Ihr Motiv) beträgt 17mm Befestigungslöcher: Teilkreisdurchmesser beträgt 23mm Durchmesser 2,1mm Aufteilung 3x120° JB-lighting Lichtanlagentechnik GmbH Sallersteigweg 15 D-89134 Blaustein 07304-9617-0...
Farbfilter mit einem fusselfreien Tuch und etwas Fensterputzmittel. Sie können auch Q-Tips oder eine Pinzette zu Hilfe nehmen. Beim Reinigen des Reflektors sollten Sie das Leuchtmittel vorher entfernen, damit es nicht beschädigt wird. JB-lighting Lichtanlagentechnik GmbH Sallersteigweg 15 D-89134 Blaustein 07304-9617-0...
1. Indroduction 1.1 General Remarks The Varyscan MICRO 150HTI is equipped with 7 colours plus white, 10 gobos (two of them interchangable), rainbow effect in different speeds and one high speed shutter. The pan and tilt movement can opperate in 8bit or 16bit mode, depening on the lighting control desk in use.
WARNING: Keep fixtures at least 1 m away from inflamable articles! Always use a safety cable attached to the base! The Varyscan MICRO 150HTI can either be placed on the floor or hung on a trussing system. If mounting the unit to walls in a vertical way, the lamplife might be reduced.
Don´t use fixtures when top cover is not fixed propperly. Contact with electronical parts can result in risk for life. (Electrical shock 5000V) Connect fixture only after assuring that the electrical installation fits your demands JB-lighting Lichtanlagentechnik GmbH Sallersteigweg 15 D-89134 Blaustein 07304-9617-0...
Varyscan MICRO 150HTI 3. Operation 3.1 DIP switches The DIP switches are located at the base of the Varyscan Micro 150HTI. The are used to define the different operation modes. -128 -256 -Mode 3.2 8 bit and 16 bit mode...
The gobos can be removed by loosening the three screws M2. For the design of custom made gobos please have a look at the enclosed technical drawing: Diameter: 26mm Diameter image: 17mm Mounting holes: diameter 2,1mm reference diameter 23mm allocation 3x120° JB-lighting Lichtanlagentechnik GmbH Sallersteigweg 15 D-89134 Blaustein 07304-9617-0...
Remove lamp before cleaning the optical parts of the fixture. Use a soft cloth and gently whipe reflector, lenses and colour filters. You also may use a pair of tweezers and a regular glass cleaner. JB-lighting Lichtanlagentechnik GmbH Sallersteigweg 15 D-89134 Blaustein 07304-9617-0...