SIZZIX Twist & Style Anleitung

®
1. Measure desired length of material such as wire, cording, thread or oss.
2. Fold material in half or create loop at the end of single strand. Trim ends
evenly and add embellishments if desired.
3. For wire, unscrew thumb screw and insert trimmed ends into holder.
Tighten screw. For cording or other material, make a knot at the end of
material and attach end to hook.
4. Secure section cup anchor to smooth surface. Lock in place with lever down.
5. Place loop end over pin on anchor. If needed, pinch loop in place.
6. Hold front hand in place and turn back hand clockwise to twist material
until desired result is achieved.
7. For best results, keep material taut while twisting with hands level to
the anchor.
For European customer support, please visit www.sizzix.co.uk
Twist & Style
For customer support, please visit sizzix.com
866-742-4447 toll-free in USA
949-598-5897 outside USA
within UK: 0844 499 8181
outside UK: +44 (0) 845 345 2277
Made in China
Instructions
™