Using Data Transfer/Fitvigo App; Using Measured Values Stored On The Device - ADE BPM 1600 FitVigo Bedienungsanleitung

Using Data Transfer/FITvigo App

Using Data Transfer/FITvigo App
If the blood pressure monitor is successfully connected to your smartphone, the
measurement data will be automatically transferred to the app via
Note the displayed symbols:
Flashes: Data is being transmitted
Permanent display + "done": Data transfer successful
Data transfer failed. The current measurement data are temporarily
stored on the blood pressure monitor and will be transferred to your
smartphone together with the next measurement.
Abide by the following points in order to prevent possible transmission problems:
‚ The distance between the blood pressure monitor and your smartphone should
not exceed 10 m.
‚ There should be no obstacles between the blood pressure monitor and
the smartphone.
‚ Other electronic devices (especially those with
should be at least 1 meter away from the blood pressure monitor.
‚ Make sure that

Using measured Values stored on the Device

Access stored measured values
Max. 60 measurements are stored on the device. In the app, however, the storage
capacity is theoretically unlimited.
34
Bluetooth®
is enabled on your smartphone.
1. Press the
The display shows the result of the last measurement.
2. Use the
backward through the stored data.
Bluetooth®
/MEM button while the device is off.
/MEM or /SET button to scroll forward or
Blood pressure monitor/Wrist BPM 1600
Bluetooth®
.
transfer or sending)