General Information; Requirements; Procedure For First Start-Up - AKE PowerCom Bedienungsanleitung

General information

With the AKE PowerCom Bluetooth Accessory Adapter PB-AA D&S
from AKE you can wireless connect your PowerCom motorbike communication
system or compatible syystems to various Bluetooth devices.
The Bluetooth Accessory Adapter offers a wireless
connection to GPS and audio equipment in stereo quality as well
as a wireless connection in duplex to a phone or two-way radio.
Smartphones and other Stereo-Audio/GPS/Phone combi-
devices can therefore easily be connected to your motorbike
entertainment system.
Pair and Go: If using the equipment paired with the
Bluetooth Accessory Adapter, you will automatically get
the Bluetooth connection as soon as the system is started ((if that
device permits this).
With the Bluetooth Accessory Adapter you can use your
Bluetooth devices without cables on the motorbike and let your
PowerCom system handle the adjustment and modulation of
the connected equipment.

Requirements

1. An AKE motorbike communication system ON TOUR PLUS or INNOVA
PLUS with Universal connector (starting series 05). (Matching versions for
other devices and connections on request.)
2. A Bluetooth master system, e.g. audio, GPS, two-way radio or phone with
Bluetooth interface (or external Bluetooth gateway, e.g. Art-No. 39310 ).
3. All Bluetooth components must be within the reach of the Bluetooth
connection (Class 2 max. 10 m)
4. Battery and charger are not necessary. The Bluetooth Accessory
Adapter is powered by vehicle power.

Procedure for first start-up

First activate your Bluetooth master device (mobile phone, GPs, etc.) and start the
Bluetooth mode. Now connect the AKE Bluetooth Accessory Adapter with
the matching connector on your motorbike intercom. To indicate the operational
status of the Bluetooth Accessory Adapter the LEDs flash after approx. 30
No charging, no external power
and no handling necessary
11