Registering Magic Remote - LG 32LF63 Serie Benutzerhandbuch

B
Adjusts the volume level.
P
Scrolls through the saved programmes.
(MUTE) Mutes all sounds.
* By pressing and holding the button, audio descriptions
function will be enabled. (Depending on model)
(HOME) Accesses the Home menu.
(BACK) Returns to the previous level.
Clears on-screen displays and return to TV viewing.
EXIT
GUIDE
TEXT T.OPT SUBT.
C
Wheel (OK) Press the center of the Wheel button to select a
menu. You can change programmes by using the wheel button.
Navigation buttons (up/down/left/right)
Press the up, down, left or right button to scroll the menu.
If you press buttons while the pointer is in use,
the pointer will disappear from the screen and Magic Remote will
operate like a general remote control.
To display the pointer on the screen again, shake Magic Remote to
the left and right.
Shows programme guide.
(Screen Remote) Displays the Screen Remote.
*Accesses the Universal Control Menu. (Depending on model)
D
Used for viewing 3D video. (Only 3D models)
(Voice recognition)
Network connection is required to use the voice recognition function.
1. Press the voice recognition button.
2. Speak when the voice display window appears on the left of the
TV screen.
Use the Magic Remote no further than 10 cm from your face.
The voice recognition may fail when you speak too fast or too
slowly.
The recognition rate may vary depending on the user's
characteristics (voice, pronunciation, intonation, and speed)
and the environment (noise and TV volume).
(Q. Settings) Accesses the Quick Settings.
Coloured buttons These access special functions in some menus.
( : Red,
C
TELETEXT buttons(
teletext.
Recalls your preferred subtitle in digital mode.
D

Registering magic remote

How to register the magic remote
To use the Magic Remote, rst pair it with your TV.
1 Put batteries into the Magic Remote and turn the TV on.
2 Point the Magic Remote at your TV and press the
the remote control.
* If the TV fails to register the Magic Remote, try again after turning the
TV o and back on.
How to deregister the magic remote
Press the (BACK) and
ve seconds, to unpair the Magic Remote with your TV.
* Pressing and holding the
register Magic Remote at once.
: Green, : Yellow, : Blue)
, ) These buttons are used for
Wheel (OK) on
(HOME) buttons at the same time, for
button will let you cancel and re-
15