Guzzanti GZ 90 Gebrauchsanleitung Seite 97

Troubleshooting
CAUTION!
competent person must do the troubleshooting that is not in this manual.
Important!
Problem
The food is too warm.
much.
These data are necessary to help you quickly and correctly. Write the necessary data here, refer to the rating
plate.
Possible cause
Temperature regulation knob is set at
loose
Fuse has blown or is defective.
Socket is defective.
Door was open for an extended
period.
placed in the appliance within the last
24 hours.
The appliance is near a heat source.
Temperature is set too cold.
The appliance is touching the wall or
of the appliance is touching another
part of the appliance or the wall.
Solution
Set the knob at other number to
switch on the appliance.
Insert mains plug.
corrected by an electrician.
Setting section.
necessary.
Turn the temperature regulation to a
colder setting temporarily.
section.
Turn the temperature regulation knob
to a warmer setting temporarily.
If necessary, carefully bend the
component out of the way.
13