Technical Specifications - Omnitronic KEY-25 Bedienungsanleitung

Key Enable/Disable
Enables or disables the key. If you have
disabled a key, operating it will not transmit a
MIDI message.
Key Behavior
Selects one of the following two modes:
• Momentary: A control change message with
the On value will be transmitted when you
press the key, and with the Off value when you
release the key.
• Toggle: Each time you press the key, a
control change message with the On value or
Off value will be transmitted alternately.
CC Number
Specifies the control change number of the
control change message that is transmitted.
On Value
Specifies the On value of the control change or
note on message.
Off Value
Specifies the Off value of the control change
message.

6. TECHNICAL SPECIFICATIONS

Power supply: ....................5 V DC via USB bus
Power consumption: ..........<100 mA
USB port: ...........................2.0, type mini-B
Dimensions (WxDxH): .......346 x 97 x 53 mm
Weight:...............................440 g
Operating system:..............Windows XP, Vista, 7
...........................................Mac OS X 10.3.9 and
...........................................better
Please note: Every information is subject to
change without prior notice. 03.04.2012 ©
12/12 00068799.DOC, Version 1.0