Jetter JX3-BN-CAN Installationsanleitung Seite 8

The JX3-BN-CAN bus head has to be mounted at the very

left side of the JX3 station.
The maximum number of JX3 modules, that can be

connected to a JX3 station, depends on the power
consumption and address range assigned to the modules.
For more information refer to our
"JX3_sysbus_configurator". This file can be downloaded
from our homepage http://www.jetter.de. Here, click
"Support", navigate to
"Downloads/08_miscellaneous/jx3_system_bus/tools/" and
select the file.
If more JX3 modules are to be connected, a power supply

module JX3-PS1 must be used.
Downloaded from www.Manualslib.com
Configuration
manuals search engine