Usage of the Adapter
1
2
3
4
5
20
Downloaded from
www.Manualslib.com
2
1
4
3
manuals search engine
Attaching the Adaptor on to the chassis
• Engage the brake.
• Release the carrycot or seat unit in accordance with the instructions
in the pram manual.
• Attach the Adaptor on to the chassis by pushing the Adaptor into the
Easy Fix locking mechanism (1) until you hear it click into place.
• The Adaptor should be positioned so that the bent parts (2) of the
Adaptor points towards the handle of the pram.
WARNING!
• Always engage the brake when you attach the Adaptor to the
chassis.
• Make sure that the Adaptor is securely attached into both locking
mechanisms on the chassis.
• Never lift the Adaptor when it is attached to the chassis.
Click the Emmaljunga First Class
• Hold the Emmaljunga First Class
attach it on to the Adaptor (3) so that the foot end of the
Emmaljunga First Class
0+Base
handle of the pram (4).
• Click the Emmaljunga First Class
pressing it down on to the Adaptor until you hear a click. Make sure
that the car seat clicks into place on the adaptor's four attachment
points.
• Hold the Emmaljunga First Class
carrying handle and do not release your hold until you have
secured the Emmaljunga First Class
the Adaptor.
WARNING!
• Make sure before usage that all locks are locked into position
between the car seat and adaptor and the Adaptor and chassis.
• Only use the Adaptor and car seat with the child's feet pointing
towards the handle of the chassis.
The Emmaljunga First Class
on to the Adapter and the chassis.
Manual Adapter for Travel System Emmaljunga First Class
car seat on to the Adaptor.
0+Base
car seat by the handle and
0+Base
car seat is pointing towards the
car seat on to the Adaptor by
0+Base
car seat at all times by the
0+Base
car seat into position on
0+Base
is now correctly assembel
0+BASE
v. 1.3
0+Base