Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Safetyinformation
and quick start guide for the YUNTO-Smile Series
Thank you for choosing a product from ONLINE USV-Systeme AG. This sheet contains important instructions
that you must follow during the installation and maintenance of the UPS system and the batteries. Failure to
comply can cause serious technical damage, serious injuries or even death. Please read all the instructions in
the manual before working with the device. The manual is available to download free at www.online-ups.com.
•
The UPS system carries life-threatening voltages. All repair and maintenance work must be carried out by customer service personnel.
•
The UPS system has its own energy source (batteries). The output of the UPS system can be live even when the UPS system is not
connected to a source of alternating current.
•
In order to reduce the risk of fire or electric shock, the UPS system may only be installed n buildings with controlled temperature and
air humidity in which there are no conductive contaminants. The ambient temperature must not exceed 40°C. The UPS system must
not be operated near water or in extremely high air humidity (>90%).
•
Before transporting the UPS system, make sure that it is disconnected from the power supply and switched off and that the batteries
are deactivated.
•
Batteries can pose a risk of electric shock or catch fire as a result of high short circuit current. Please take the necessary precautionary
measures. Maintenance must be carried out by qualified personnel who are trained in handling batteries and have good knowledge
of the necessary precautionary measures. keep unauthorized personnel away from batteries
•
Batteries must be disposed of properly. Local regulations must be taken into consideration.
•
Batteries must not be burnt. There is risk of explosion.
Scope of delivery
UPS
Quick start guide
(Manual download see www.online-ups.com)
Installation and getting started
Make sure that the overall rated performance of the load connected does not exceed the
capacity of the UPS system. The power consumption of inductive loads can be very high,
please take this into consideration when specifying your UPS system.
Laser Printers are not allowed to be connected!
1. Connecting load
To connect the load to the UPS system, plug the power cord of the load in the UPS.
2. Supply the UPS system with utility power
Plug the mains connection cable of the UPS into a wall outlet socket.
3. Switching on the UPS system
Push the
switch on the UPS system. The LCD Display will light up for roughly 4s and the UPS will show
the input voltage on the display. The UPS system is working in normal mode.
4. Switch the load on one by one.
The LCD Display is touch sensitive. The displayed information can be changed between Input-/Output-
Voltage, Load and Batterie-Capacity.
5. USB Output is capable of charging devices as e.g. Tablets or Smartphones. To use the charging function
connect the USB Cable of the device to the USB Output.
The comprehensive user manual is available to download free at www.online-ups.com.
ONLINE USV-Systeme AG - Luise-Ullrich-Straße 8 - 82031 Grünwald / Germany - www.online-usv.de
ONLINE USV-Systems S.r.l. - Via Ferruccio Gilera 110 - I-20862 Arcore (MB) - www.online-ups.it
ONLINE USV-Systeme AG - c/o swizzconnexx- Pilatusstr. 17 – CH-5630 Muri - www.online-usv.ch
PLEASE NOTE
YUNTO-Smile 400 - 800
1
1
Werbung
