Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Quicklinks
AP602, AP602T Instructions
(A)
Small wood screws
Landing
Gear
Wing Struts
Hardware provided:
8 small wood screws
4 small screws
4 medium screws
8 large screws
16 washers
Required for assembly:
Small Phillips screwdriver
(B)
Medium screws
& washers
Lower Wing
Underside
(Fig. 1)
Center Wing
Lower Wing
Top View
(Fig. 2)
Landing Gear
1. Remove plane from packaging. Turn
Fuselage upside down, exposing underside,
and gently set on soft material to protect
fragile tail parts during assembly.
2. Match holes in flanges of Landing Gear
struts to holes on Fuselage underside.
(Fig. 1) (Crossed lines on Landing Gear
should face toward nose of plane.) Secure
with 8 small wood screws (A), tightening
with a screwdriver.
Lower Wings
(C)
3. Set pegs of Lower Wings into slots on each
Large screws
side of Fuselage. Secure with 2 medium
& washers
screws (with washers) (B) set into holes in
Fuselage on each side.
4. Set Wing Struts into slots in Lower Wings.
Secure using 2 large screws (with washers)
Aileron
(C) set into holes on each Lower Wing.
(Notches on Strut ends should face toward
Ailerons, and string loops on Struts should
face toward Fuselage.)
Wing Struts
Upper Wings
5. Turn plane right side up (Fig. 2). Set pegs
of Upper Wings into slots in Center Wing,
and set slots in Upper Wing underside over
Upper Wing
Wing Struts
Aileron
(E)
Small screws
& washers
The Netherlands
AM NL
Ambachtsweg 37
NL-3899 AM
Zeewolde
Wing Strut ends.
Secure Struts using
(D)
2 large screws (with
Large screws
washers) (D) set
& washers
into holes on each
Upper Wing.
6. Secure Upper Wings to
Center Wing with 2
small screws (with
washers) (E) set into
holes in Center Wing
underside on each side.
Lines
7. Untie and separate lines before
attachment. Hook lines from
Center Wing struts to loops on
lower Wing Struts as illustrated.
8. Hook lines from Lower Wing
and from Landing Gear to
upper Wing Struts.
9. Hook lines from lower wing
Ailerons to loops on each upper
wing Aileron.
United States
AM USA
888 Garfield
P.O. Box 21710
Eugene, OR 97402
Werbung
Verwandte Anleitungen für Authentic Models AP602
Inhaltszusammenfassung für Authentic Models AP602
- Seite 1 AP602, AP602T Instructions Landing Gear Hardware provided: 1. Remove plane from packaging. Turn 8 small wood screws Fuselage upside down, exposing underside, Small wood screws 4 small screws and gently set on soft material to protect 4 medium screws fragile tail parts during assembly.
- Seite 2 AP602, AP602T Instructions Train d'Atterrissage Matériel fourni : 1. Retirez l'avion de l'emballage. Retournez le 8 petites vis à bois Fuselage de façon à ce qu'il présente son dessous Petites vis à bois 4 petites vis vers le haut. Poser délicatement le Fuselage sur un 4 vis moyennes support souple pour protéger la queue fragile...
- Seite 3 AP602, AP602T Aufbauanleitung Fahrgestell Mitgeliefertes Zubehör: Nehmen Sie das Flugzeug aus seiner Verpackung. Drehen Sie den Flugzeugrumpf auf den Rücken, so dass Sie seine 8 kleine Holzschrauben Kleine Holzschrauben Unterseite sehen (Abb.1) und legen Sie ihn vorsichtig 4 kleine Schrauben auf eine möglichst weiche Unterlage, um einzelne,...