lmp NexGen WKP-803 Handbuch Seite 7

Using the Pairing Button
You may use the pairing button after you have changed the battery (you
4
need to set up the LMP NexGen Keypad like you did for the first time) or
when the connection is constantly lost, follow the Manual „Pairing the
LMP NexGen Keypad in Mac OS X"
4 If you have used the LMP NexGen Keypad with another Mac computer, you
have to set up the LMP NexGen Keypad again. Follow the Manual „Pairing
the LMP NexGen Keypad in Mac OS X"
When you enter a digit on the LMP NexGen Keypad, it is not
highlighted as with some other Bluetooth devices. Keep ente-
ring the digits quickly and press the „en ter" key on the LMP
NexGen Keypad at the end. If it takes too long to enter the
8-digit ID or if you have entered a wrong digit, you may have
to enter the ID again.