Replacement Parts - Schumacher Electric SPI2 Benutzeranleitung

PROBLEM
I cannot select a 6V or
12V setting.
The yellow/orange
LED is flashing.
The red LED is
flashing.
17. SPECIFICATIONS
Input .................................................................................................. 230V AC~50Hz, 0.5A
Output ................................................................................................. 6V
Dimensions – H x W x D ...........................................................193 mm x 84 mm x 78 mm
Weight ..................................................................................................................... 0.65 kg
Output protection .......................................................................................................... Yes
Reverse polarity protection, spark/arc-proof ................................................................. Yes
Ingress Protection rating ..............................................................................................IP54

18. REPLACEMENT PARTS

Battery clamps (quick-connect)..................................................................... 3899002636Z
Ring connectors (quick-connect) ................................................................. 2299002042Z
19. LIMITED WARRANTY
WARRANTY TERMS AND CONDITIONS
Schumacher Electric Corporation (the "Manufacturer") or the resellers authorized by the
Manufacturer (the "Reseller") warrant this Charger (the "Product") for two (2) years, according
to the following stipulations. Any and all warranties, other than the warranty included herein, are
hereby expressly disclaimed and excluded to the fullest extent permissible under applicable
law. Legislation may imply warranties or conditions or impose obligations on Manufacturer
which cannot be excluded, restricted or modified in relation to consumer goods.
Consumer End-User Warranty
Any claims under this warranty must be communicated to Reseller within 2 months after
discovery of the non-conformity.
Resellers/Professional End-User Warranty
The Manufacturer provides a limited warranty for hidden defects or non-conformities.
This warranty is subject to the following conditions:
a. The Manufacturer only warrants hidden defects in material or workmanship present
in their root cause at the moment of the first sale by the Manufacturer;
b. Manufacturer's obligation under this warranty is limited to repairing or replacing the
Product with a new or reconditioned unit at the sole option of the Manufacturer;
POSSIBLE CAUSE
The charger is equipped with
Auto Voltage Detection, which
automatically detects the voltage
and charges the battery.
The battery is sulfated.
The battery is too large for the
charger.
The clamps are not making a
good connection.
The fuse is bad.
No problem; this is normal.
Reset the charger by briefly
unplugging it.
You need a charger with a higher
amp rate.
Check for poor connection at
battery and frame.
Replace the in-line fuse for the
ring connector.
• •
10
REASON/SOLUTION
2A, 12V 2A