Arthrex AR-1611S Bedienungsanleitung
Inhaltszusammenfassung für Arthrex AR-1611S
- Seite 1 INSTRUCTIONS FOR USE (AR-1611S) ARTHREX WRIST TRACTION TOWER Assembly Zusammensetzen Remontage Comporre Ensamblaje...
- Seite 2 ENGLISH The Wrist Traction Tower facilitates arthroscopic surgery of the wrist by maintaining the arm in a position comfortable for the patient, as well as accessible to the surgeon. Traction forces control wrist distraction, through the sterile Finger Traps, by using weights applied to the main boom cable. In addition to provid- ing a counter-traction force, the upperarm cradle post will help maintain a stable position of the wrist for operative procedures such as reduction of distal radius fractures and fixation with pins or external fixation.
- Seite 3 ENGLISH Instructions for use: Slide the boom cable down into the vertical Once assembled, swing the boom to the desired Place the upper lip of the Clark Rail Adapter upright beam. Seat the beam up inside the boom radial position and turn the knob clockwise to lock over the Clark Rail.
- Seite 4 The post will snap into adjustable by placing your thumb on the screw post, pull- the horizontal adjustment arm. See Arthrex DFU- ing the lever out from the post, and turning the lever to 0023 for autoclaving instructions.
- Seite 5 ENGLISH Instructions for use: Attach the nonsterile Foam Insert (AR-1615) to Attach the autoclavable Finger Distraction Optional: Use the Traction Scale Attachment the upper arm cradle. Attachment (AR-1614, sold separately). (AR-1604, sold separately), between the Finger Distraction Attachment and the cable. Attach weights to the cable end at the bottom DEUTSCH of the vertical upright beam.
- Seite 6 0086 Arthrex, Inc. 1370 Creekside Boulevard, Naples, Florida 34108-1945 USA Tel: 800-934-4404 • www.arthrex.com Arthrex GmbH Erwin-Hielscher-Strasse 9 81249 München, Germany Tel: +49 89 909005-0 • www.arthrex.de © 2009, Arthrex Inc. All rights reserved. LAI1611S, rev. 3...