X-Micro XWL-11GPAG Benutzerhandbuch Seite 14

Encryption: Select Enable or Disable data encryption feature.
Aut. Mode: There are three modes available to choose.
communication. Instead, each party generates its own key-pairs and asks the other
party to accept it. The key is regenerated when the connection is established every
time.
data communication, and the key is used for extended length of time.
proper authentication mode.
The following will only be activated to allow for configuration when Encryption is
enabled.
Default Key: select one of the 4 keys to use.
Network Key: enter values to these fields, either in HEX or ASCII formats. You
only have to enter the key that you will use
Key Length: select 64 or 128 bits as the length of the keys
Key Format: ASCII or HEX
Downloaded from www.Manualslib.com
Open Authentication – the sender and receiver do not share secret Key for
Shared Authentication – the sender and receiver shares the common key for
Auto – depend on the communication to establish, and automatically use the
manuals search engine