Werbung
d
ation
12
24
n
1
13
5
1
e
8
4
tion
Downloaded from
www.Manualslib.com
HDMI_SPDIF Cable
(Optional)
A. black end
2 . 7
2 . 7
Driver Installation Guide
Driver Installation Guide
2 . 7
2 . 7 Driver Installation Guide
2 . 7
Driver Installation Guide
Driver Installation Guide
To install the drivers to your system, please insert the support CD to your optical drive
first. Then, the drivers compatible to your system can be auto-detected and listed on
the support CD driver page. Please follow the order from up to bottom side to install
those required drivers. Therefore, the drivers you install can work properly.
2 . 8
2 . 8
2 . 8
2 . 8
2 . 8
Untied Overclocking T
Untied Overclocking T
Untied Overclocking Technology
Untied Overclocking T
Untied Overclocking T
This motherboard supports Untied Overclocking Technology, which means during
overclocking, FSB enjoys better margin due to fixed PCI / PCIE buses. Before you
enable Untied Overclocking function, please enter "Overclock Mode" option of BIOS setup
to set the selection from [Auto] to [CPU, PCIE, Async.]. Therefore, CPU FSB is untied
during overclocking, but PCI / PCIE buses are in the fixed mode so that FSB can operate
under a more stable overclocking environment.
Please refer to the warning on page 7 for the possible overclocking risk
before you apply Untied Overclocking Technology.
ASRock G31DE Motherboard
manuals search engine
Please connect the black end (A)
C
of HDMI_SPDIF cable to the
B
HDMI_SPDIF header on the
A
motherboard. Then connect the
white end (B or C) of
HDMI_SPDIF cable to the
HDMI_SPDIF connector of HDMI
VGA card.
B. white end (2-pin)
C. white end (3-pin)
echnology
echnology
echnology
echnology
1 9
1 9
1 9
1 9
1 9
Werbung
