Installation; Installing Appliance In The Kitchen - JGC KTD-61006 Bedienungsanleitung

Check if all parts and accessories of the appliance are provided and remove the appliance from its
packaging materials.
InSTallIng aPPlIanCE In THE kITCHEn
This kitchen TV is designed to be attached underneath a shelf or cabinet. If the shelf or cabinet is
equipped with a panel that would hide parts of the kitchen TV, use the supplied spacers to adjust
the height in which the kitchen TV has to be mounted.
This picture shows how the appliance is installed correctly. If there are no power outlets inside the
cabinet, mount the AC power cord with cord clamps to the wall and plug it into the closest power
outlet.
How to mount the kitchen Tv
• Place the drilling template (83) on the shelf or base of the cabinet beneath which you wish to
install the appliance.
• The front side of the template should lie flush with the front edge of the shelf or cabinet base.
• Now mark the position of the holes through the template with a pencil. Keep the template.
• Drill holes with a 5.5 mm diameter driller at the marked positions.
• Only use the supplied screws (40mm) (80) to attach the appliance.
• If your shelf or wall cabinet has a front panel which would conceal the installed appliance, use
the supplied spacers (82) and the longer screws (79).
• If you need longer screws, you can obtain them from your local retail stockists.
• Fold the LCD screen (6) down and rotate it counter-clockwise (not more than 270°).
• Peel the protective foil from the screen. Be careful not to scratch the screen.
Client: Rewe
Project: KTD-61006
Language: EN
Power cord
Kitchen TV
Template

InSTallaTIon

Cord clamp
Spacer
Date: 05.03.2007
Version: 02
Page: 50 (of 80 pages)
0