Adjustments To Your Remote Control; Picture In Picture (Pip) Is Not Working - Philips SRP620 Bedienungsanleitung

Downloaded from www.Manualslib.com
SBC_SRP620_v2.qxd 26-04-2005 14:58 Pagina 6
Instructions for use
TV function
Smiley
27 Smiley
Frowney
28 Frownie
Text on/off
29 Text
Text hold
30 txt mix
31
External input 1
32 Ext
33 0
P/-/-- Previous program
34 P
1
For installing TV channels on older Philips TVs
and simultaneously. For leaving the teletext menu or the
installation menu on older Philips TVs
simultaneously.
ADJUSTMENTS TO YOUR REMOTE CONTROL (TV)
This is only necessary if your TV does not respond at all or if
the TV does not respond correctly to some of the keys on the
SRP620. With a simple procedure you can adapt the SRP620
to your TV.
Teletext buttons are not working properly
Some TVs work with different Teletext commands.
Solution:
• Make sure the remote control is in TV mode
(both Mode lights must be out).
• Press and hold the OK button and digit 8 simultaneously
for 5 seconds till the mode lights blink twice.
- If Teletext still doesn't work, go to the next paragraph.
Teletext buttons do not work at all
Some Matchline TVs work with different Teletext commands.
Solution:
• Make sure the remote control is in TV mode
(both Mode lights must be out).
• Press and hold the OK button and digit 6 simultaneously
for 5 seconds till the mode lights blink twice.

Picture in Picture (PIP) is not working

Some Philips TVs work with different PIP commands.
Solution:
• Make sure the remote control is in TV mode
(both Mode lights must be out).
• Press and hold the OK button and digit 2 simultaneously
for 5 seconds till the mode lights blink twice.
6
manuals search engine
Shift TV function DVD/VCR function
Conceal/reveal
Text enlarge
Text cancel
Text mix
1-9 + 1: Radio
+ 2: TV
+ 3: HD
+ 4: PC
External input 2
0
Double digit
program selection
Short play/
long play, Options
Tuner
Select/VPS
Clear
1-9
1-9
0
, press
, press and