Inhaltsverzeichnis
Werbung
TECHNICAL INFORMATION
DC Input Characteristi cs
Input:
EMI/RFI Characteristi cs:
Input Transient Protecti on:
Low Input Voltage Shutdown: Auto Recovery
High Input Voltage Shutdown: Auto Recovery
Load Dump Protecti on:
Reverse Polarity:
DC Output Characteristi cs
Output Voltage:
Short Circuit Protecti on:
Isolati on Voltage:
Noise and Ripple:
Physical and Environmental Specifi cati ons
Operati ng Temperature:
Storage Temperature:
High Temperature:
Low Temperature:
Temperature Shock:
Shock:
Alti tude:
Vibrati on:
Humidity:
Sand and Dust:
Enclosure:
Finish:
Weight:
Dimensions:
Mounti ng Hole Size:
Following informati on is only for EU-member states:
The use of the symbol indicates that this product may not be treated as
household waste. By ensuring this product is disposed of correctly, you
will help prevent potenti al negati ve consequences for the environment
and human health, which could otherwise be caused by inappropriate
waste handling of this product. For more detailed informati on about
recycling of this product, please contact your local city offi ce, your
household waste disposal service or the shop where you purchased the
product.
11-32 VDC
Meets MIL-STD461E, CE101, CE102, CS101, CS114,
CS115, CS116, RE101, RE102, RS101, RS103
Meets MIL-STD-1275D, Voltage Surge +100 VDC, Voltage
Spike ±250 VDC
Meets ISO 7637
Auto Recovery
12-24 VDC Factory Set (See unit label)
Auto Recovery
Input to Output Non-isolated, 100 VDC Output to Case
Meets MIL-STD-1275D and MIL-STD461E CE102
-40 to +60° Centi grade
-40 to +80° Centi grade
Meets MIL-STD-810F, Method 501.4
Meets MIL-STD-810F, Method 502.4
Meets MIL-STD-810F, Method 503.4
Meets MIL-STD-810F, Method 516.5, Procedure I
MIL-STD-810F, method 500.4, Proc. II
MIL-STD-810F, Method 514.5, Procedure I, Category
20 Ground Vehicles
Meets MIL-STD-810F, Method 507.4
Meets MIL-STD-810F, Method 510.4
Extruded Aluminum
Black Anodized
32 ounces (0.7kg)
9.18 x 2.98 x 1.14 inches (23.3 x 7.6 x 2.9 cm)
0.20 inch (5.1 mm)
5
Werbung
Inhaltsverzeichnis
