Maintenance And Care - GRANIT 50700306 Originalbetriebsanleitung

4. Auto scan setting
NOTE: In scan mode, the screen automatically switches between the display of the
camera 1 (CAM1) and camera 2 (CAM2) back and forth. Use the arrow keys „up / down"
can be interrupted, the change of images.
5. Maintenance and care
• Carrying out maintenance and repair work must be conducted only by qualifi ed personnel.
• Ensure that the spare and wear parts are original.
• Carrying out maintenance and cleaning work and the correction of malfunctions are generally
permitted only when the vehicle is outside the public traffi c area.
• Fasteners must be regularly checked for tightness and, if necessary, pulled and adjusted.
• Clean the optics of the camera with a damp and soft cleaning cloth without any kind of
cleaning agents.
The menu selection „Auto scan setting" can be
carried out to select the camera.
1. CAM1 automatically fi nd on / off
2. CAM2 automatically fi nd on / off
3. Set the automatic switchover
The menu selection „Function set" can set
additional parameters.
1. Selection of the camera system NTSC or PAL
2. LED display Ambient Light Sensor on / off
3. Area Range
11