Techly 1783651 Benutzerhandbuch Seite 2

2x1 USB HDMI KVM Switch 4Kx2K
IntroduCtIon
The 2x1 USB HDMI KVM Switch 4K2K shares one HDMI display
between two HDMI sources.
features
• Share an HDTV or display, USB keyboard& mouse, and
microphone between 2 USB/HDMI computers and devices
• Provides an additional USB 2.0 sharing ports with over-current
detection and protection
• Switch between devices via front push button or hotkey
• Supports 4K@30Hz and PC's UXGA 1920x1200 resolutions
• Supports Dolby True HD and DTS HD Master Audio formats
• HDMI1.4 & HDCP compliant
• Video bandwidth: up to 3Gb/s
• Metal housing for better RF shielding
paCkage Contents
• 2×1 USB HDMI KVM Switch 4K2K
• Power adapter
• Quick installation guide
CompatIbIlIty
• Windows, Mac, Linux computers
• Game consoles, Blu-Ray DVD players, and other electronic
devices
layout
Console
USB mouse USB Keyboard
USB Port
port Port
• USB Mouse Port: Connect to USB mouse devices
• USB Keyboard Port: Connect to USB keyboard devices
• USB Ports: Connect to other USB devices
• MIC: Connect to microphone
• Audio out: Connect to earphone
• Audio LED: Audio ON/OFF Indication
• Audio Switch: Switch to enable/disable the MIC/Audio out
function
• Port LED: Indicate which HDMI source is selected
• Port Select: Switch between the HDMI sources
Sink
5 V/DC, 2 A HDMI HDMI
Power Jack HDMI Output
• Power Jack: Connect to the included power adapter
• HDMI Output: Connect to HDMI Display
• HDMI Input: Connect to source device's HDMI
• USB Port: Connect to PC's USB port
hardware InstallatIon
1. Power off all devices you plan to connect to the 2x1 USB
HDMI KVM Switch 4K2K.
2. Connect a monitor/display to HDMI OUTPUT of the switch
by an HDMI cable.
3. Connect a USB keyboard and a USB mouse to USB
keyboard and Mouse Ports of the switch.
USER'S MANUAL
Audio ON/OFF Select
PC2 PC1
Source
Audio Audio Audio Port
MIC
Port LED Switch LED
PC1 PC2
USB HDMI USB
HDMI Input USB Port
4. Connect the computer's HDMI connector to the switch's
INPUT 1 connector using the HDMI cable.
5. Connect the computer's USB port to the switch's PC1
connector (USB Type B) using the included USB cable.
6. For the second computer, follow steps 4 to 5 to connect the
preferred system/device to INPUT 2 and PC2.
7. Optional: Connect other USB peripherals you wish to share
between the connected computers/devices to the extra USB
ports on the switch.
8. Connect the power adapter into the switch's Power Jack.
9. Power up the first computer/device and wait until it is
fully booted up. Make sure the keyboard and mouse work
properly.
10. Once the first computer system is successfully setup, press
the Switch button and power up the second computer/
device to verify the setup properly.
11. The installation is complete and the 2x1 USB HDMI KVM
Switch is ready for use.
Note: At least 1 connected device has to be a PC with USB port.
Otherwise, the switching mechanism couldn't work.
hotkey
Follow the hotkey command listed below for selected operating
functions:
Command
[Caps Lock]+[Caps Lock]+1
[Caps Lock]+[Caps Lock]+2
[Caps Lock]+[Caps Lock]+
[Caps Lock]+[Caps Lock]+
[Caps Lock]+[Caps Lock]+S
[Caps Lock]+[Caps Lock] +S+n
Port
select
safety preCautIons
C A U T I O N
RISK OF ELECTRIC SHOCK
DO NOT OPEN
required. Disconnect the product from mains and other
equipment if a problem should occur. Do not expose the product
to water or moisture.
Maintenance:
Clean only with a dry cloth.
Do not use cleaning solvents or abrasives.
Warranty:
No guarantee or liability can be accepted for any changes and
modifications of the product or damage caused due to incorrect
use of this product.
In compliance with EU Directive WEEE this product is
marked with this symbol. It means that used electrical
and electronic products should not be mixed with
general household waste. There is a separate
collections system for these products in compliance
with WEEE directive, otherwise contaminative and hazardous
substances can pollute the environment.
With the CE sign, Techly® ensures that the product is
conformed to the basic European standards and directives.
www.techly.com
Function
Switch to PC1
Switch to PC2
Switch to next PC
or
→
Switch to previous PC
→ or
Auto-scan mode every 10 seconds
Set auto-scan rate,
[Esc] switch to regular mode
To reduce risk of electric shock,
this product should ONLY be
opened by an authorized
technician when service
EN
is