Fellowes Cambio Bedienungsanleitung Seite 5

STEP 7
Connecting cords
*Note: Please make sure the slot on the control box is facing upward. There is no corresponding relation
between the two motor ports and the two lifting columns.
**Note: The picture of the controller is for your reference only. Actual product may vary.
ACCESSORY INSTALLATION - CABLE MANAGEMENT TRAY
Cable management tray
screw holes on the cable management tray. Assemble
the tray hangers with 4 Phillips Head screws using a
Phillips screwdriver.
management tray.
1
J
K
U
L
H
C
2
5