Operation; Power On/Off; Video Recording - Wiseup GL 1300 Benutzerhandbuch

III. Operation
>> Please make sure your camera is fully charged before using.
>> Please make sure the Micro SD card has been formatted already and is securely fitted
into the camera's SD card slot, or it will not work. We recommend you use a SDHC Class
10 Micro SD card.
[Note]:
If no Micro SD card is fitted into the camera, the camera will shut down automatically.
The blue indicator light will be illuminated for 3 seconds, then both blue and red indicator lights
will keep flashing alternatively for 30 seconds and then turn off.

3.1. POWER ON/OFF

3.1.1. Power on the camera by pressing the Power Button for 2 seconds. The blue
indicator light will come on and flash once, then stay illuminated, indicating the camera
has entered into standby mode.
3.1.2. Power off the camera by pressing the Power Button for 2 seconds again. Both blue
and red indicator lights will come on and then turn off in 1 second.
[Note]:
The camera will shut down automatically if it is in standby mode without any operation
more than 1 minute.

3.2. VIDEO RECORDING

3.2.1. Power on the camera by pressing the Power Button for 2 seconds. The blue
indicator light will come on and flash once, then stay illuminated, indicating the camera
has entered into standby mode.
3.2.2. Press the Video Recording Button once to start video recording. The blue indicator
light will flash 3 times and then turn off.
3.2.3. Press the Video Recording Button once again to stop video recording. The blue
indicator light will flash twice and then stay illuminated, indicating the camera is back to
standby mode.
[Note]:
1). A video clip will be generated and saved every 10 minutes automatically.
2). The camera can record video for 1 hour continuously on a full charge.
3). Video Resolution: 1920x1080P
4). If the camera is in low battery, it will save all video files and then shut down automatically. Both
Video Format: AVI