REV Ritter 0514902555 Bedienungsanleitung Seite 8

GB
Illustrations
Receiver

Transmitter

Existing door bell system

Existing door bell sensor

Operation as radio-controlled door chimes
I
Operation with existing door bell system (circuit diagram)
II
Operation with existing door bell sensor (circuit diagram)
III
Battery compartment for 3 x 1.5V batteries LR 14 Baby C
➀
(not included)
➁ Battery compartment for 2 x 1.5V batteries LR03 Micro
AAA (included)
➂ Coding switch
➃ Chime selector switch
➄ Function selector switch (a) Chime function
(in battery compartment) (b) Paging function
➅ Sensor head
Signal type selector switch (a) Chimes
➆
Reset function - Paging
➇
F lashlight covers: transparent, blue and orange
➈
Marking panel
➉
12
(a) 2-tone chimes
(b) 3-tone chimes
(c) Westminster chimes
(b) Flash
(c) Flash and chimes
Dear customer,
We would like to thank you for purchasing our radio-controlled
door chimes. They offer you enormous product advantages and
are easy to operate and install. Please read the following operating
instructions carefully before installing and using the door chimes.
Contents
1. General instructions
2. Technical details
3. Battery operation
4. Coding
5. Chime selection
6. Function selection
7. Integration into an existing door bell system
8. Changing the flashlight covers
9. Marking panel
10. Important instructions
11. Troubleshooting
12. Cleaning
13. Guarantee
14. Disposing of batteries
13