Smanos SS-20 Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für SS-20:

Diese Anleitung herunterladen

Introduction

The SS-20 Indoor Siren will go off on-site, with a loud 104dB siren

sound, to deter any would-be intruders when a sensor of K1/K2

system has been triggered. It is smart to have 2-4 sirens strategically

placed around the your home as it easily deters any intruder if they

defeated one siren but still hear NOISE! Intruders DO NOT like

attention.

Pairing to the K1/K2 Hub

This Siren needs to be paired to the K1/K2 Hub first before use. To

pair the Siren, please refer to the K1/K2 Hub's user manual or in the

K1/K2 section of the smanos home app, press the "+" button and

follow the instructions on the Accessories page to easily add your

smanos SS-20 siren.

Product Overview

Back View with mounting plate & level

Tamper

LED Indicator

Switch

LED Indicator

Blinks rapidly:

K1/K2 system is alarming.

Blinks once per 3 seconds:

Low battery, please change the batteries.

Tamper Switch

Anti-tamper protection ensures that any attempts to move the Siren

off the Mounting Plate will result in an alarm, push notification and

possible email if selected.

Seite 1 Introduction Product Overview The SS-20 Indoor Siren will go off on-site, with a loud 104dB siren Back View with mounting plate & level sound, to deter any would-be intruders when a sensor of K1/K2 system has been triggered. It is smart to have 2-4 sirens strategically...
Seite 2 The Siren can be placed in any location as long as it is within the range with K1/K2 Hub Specifications Set the K1/K2 system to Test Model: SS-20 Mode, and then trigger the Siren Power: 3V CR123A Li-Mn battery x 4 pcs by pressing the Tampering Switch Sound: 104 Decibels on the back of the Siren.
Seite 3 FCC STATEMENT 1.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: INFORMATION FOR THE USERS (1)This device may not cause harmful interference. At the end of its life, the device has to be separated from the other waste. Consign the (2)This device must accept any interference received, including interference that may device and all its components together to a center of electronical and electrotechnical cause undesired operation.
Seite 4 INFORMATION FOR THE USERS At the end of its life, the device has to be separated from the other waste. Consign the device and all its components together to a center of electronical and electrotechnical waste recycling center, designated by your local authorities. INFORMATIONEN FUR DIE BENUTZER Das Gerat am Ende seiner Lebensdauer von den anderen Abfallen getrennt werden muss.