Herunterladen Diese Seite drucken

Werbung

101808 - Grommet
60007 - Cable Tie
IMPORTANT
No liability is accepted for damage caused by incorrect installation.
The installation and assembly must be regularly inspected for evidence of damage or loose parts.
Product has been designed specifically for the mounting of approved marine electronics under normal boating conditions.
IMPORTANT
Scanstrut déclinent toute responsabilité pour les dégats résultant d'une installation incorrecte.
L'installation et l'assemblage doivent être inspectés régulièrement afin de déceler des dégats ou des pièces désserrées
Ce produit a été spécifiquement conçu pour le montage d'appareils d'électronique marine approuvés dans des conditions de navigation normales.
WICHTIG
Für Schäden aufgrund unsachgemäßen Einbaus wird keine Haftung übernommen.
Der Anbau und die Baueinheit müssen regelmäßig auf Anzeichen von Schäden oder lockere Teile geprüft werden.
Dieses Produkt wurde spezifisch für die Befestigung genehmigter Elektronikgeräte für die Schifffahrt unter normalen Bootsfahrtsbedingungen
entwickelt.
IMPORTANTE
Si declina qualsiasi responsabilità per danni causati da un'installazione erronea.
L'installazione e il montaggio devono essere ispezionati con regolarità per verificare la presenza di danni o di pezzi allentati.
Questo prodotto è stato studiato appositamente per il supporto di apparecchiature elettroniche navali approvate in normali condizioni di
navigazione.
IMPORTANTE
No se aceptará ninguna responsabilidad por los daños causados por una instalación incorrecta.
La instalación y ensamblaje deberá inspeccionarse regularmente, comprobando cualquier evidencia de daños o piezas aflojadas.
Este producto ha sido específicamente diseñado para el montaje de equipos electrónicos marinos aprobados bajo condiciones normales de
navegación.
Scanstrut Ltd.
1 Malt Mill, Totnes, Devon, UK TQ9 5NH
E-mail:
technical@scanstrut.com
Recommended:
Scanstrut DS-30 Deck Seal
Tel:
+44(0)1803 863800
Fax:
+44(0)1803 862223
Website:
www.scanstrut.com
Scanstrut Installation Instructions
20-07-11 Issue 1
T-Pole
INSTALLATION SOLUTIONS FOR MARINE ELECTRONICS
®

Werbung

loading

Inhaltszusammenfassung für Scanstrut T-Pole

  • Seite 1 Product has been designed specifically for the mounting of approved marine electronics under normal boating conditions. IMPORTANT Scanstrut déclinent toute responsabilité pour les dégats résultant d’une installation incorrecte. L’installation et l’assemblage doivent être inspectés régulièrement afin de déceler des dégats ou des pièces désserrées Ce produit a été...
  • Seite 2 Tools Required Power drill 13mm Spanner 10mm Spanner Posidriv No. 3 ø6.5mm Drill bit Screwdriver 60068 Parts List 60065 60621 Antennae Mounting Bar 60453 - U-Bolt 60060 60452 60085 60453 60452 - M6 Sleeved Nut 60085 - 8mm Washer 60007 - Cable Tie 60453 Main Strut 60065...