Samsung SHG-120 Installationshandbuch Seite 3

Align the arrow on the camera adaptor with the arrow on the
5
Smartdome Camera, insert the three bosses on the back of the
camera into the three camera adaptor holes, together with the
connectors, and turn the camera about 15 degrees clockwise.
(Listen for the click that confirms engagement and make sure
that the locking lever returns to its original position.)
Camera
Secure the camera body to the camera adaptor using the
6
screw (BH M3 X L8) provided with the Smartdome Camera.
• To disengage the camera from the
camera adaptor, loosen the engaging
screw (BH M3 X L8), turn the camera
counterclockwise while the locking
lever is turned clockwise, and pull
the camera off .
3
Camera Adaptor
Camera Adaptor
2
Camera
1
15 degree
Align the boss of the
7
casing with the lever and
push the case body into
position.
Lever
Case Body Boss
Fit two screws (BH M3 L8) in the holes on the side of the
X
8
case body.
Case Body
GB
4