Teleco TVTXL868R02 Kurzanleitung Seite 3

EN
230V RADIO TRANSMITTER FOR PRESENCE SENSOR
Product code:
TVTXL868R02
TVTXL868R02F
230Vac transmitter for presence sensor or mechanical switch. Command input (L') 230Vac.
The TVTXL868R02x send the channel CH1 (On) when you switch on the 230V power supply to the L' input.
The TVTXL868R02x send the channel CH2 (Off) when you switch off the 230V power supply to the L' input.
Memorize the transmitter in "couple of channels" mode (see receiver manual).
Attention
This transmitter doesn't have any internal
memorising push-button P3, then if it
has been installed by itself, it can be
memorised only by receiver.
1 - Wiring
TVTXL868R02 wired with
presence sensor
L N
presence
sensor
transmission
in progress
Led
TVTXL
Brown
Blue
TVTXL868R02/R02F
TELECO AUTOMATION SRL
Via dell'Artigianato, 16 - 31014 Colle Umberto (TV) ITALY
TELEPHONE: ++39.0438.388511 FAX: ++39.0438.388536 - www.telecoautomation.com
230V transmitter for 50mm box
230V transmitter for modular box 1M
L':light
output
Antenna:
don't cut
L':
Command
input 230V
Black
4 8
5 0
TVTXL868R02
TVTXL868R02 wired with switch
L N
Wall mounting box
DOC.: T480.03
3
TVTXL868R02F
Antenna:
don't cut
Led
TVTXL
Brown
Black
Blue
switch
place the antenna at the extern,
on the side of the cover
DATE:08/05/18
L'