Herunterladen Diese Seite drucken

Habitat Plume 821803 Bedienungsanleitung Seite 2

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

EN
This manual contains important information that should be retained for future reference.
For domestic use only.
Self-assembly.
Warning! Keep children out of the mounting area. Leave the plastic bags out of reach. Small parts are a choking hazard.
Materials
Table top : medium density fiberboard (MDF) with corn husk and resin.
Finishing of table top: painted.
Feet : iron powder coated.
Assembly Instructions
Before beginning assembly, identify all components using the manual.
In order not to lose components, do not throw the package before completing the full assembly.
This product must be assembled by an adult.
Assemble on a clean, flat surface.
Do not use a power screwdriver as it may damage the product.
Recommendations for use
This product was designed for indoor use only.
Do not stand on the product.
Do not sit on the product.
Beware of sharp objects.
The wood-based products, particle board, painted, varnished and / or lacquered may emit an odor when opened. This
smell disappears after a few weeks if the room is properly ventilated.
Maintenance
In order not to damage the surface, it is recommended not to deposit a hot or humid object directly on it. Do not use
magazines or newspapers as trivets. The ink used may leave traces that can permanently stain the surface of the table.
To avoid the appearance of marks, do not leave any object immobile for more than 2 months. To avoid scratches, do not
use a recurring sponge or grain detergent. Sponge up spills immediately with a clean, dry cloth. The use of special
products for furniture is not recommended or even necessary. Do not place the product near a heat source (radiator,
chimney, etc.) or a source of moisture. Heat and moisture can damage the product. Avoid direct and prolonged exposure
of the product to solar radiation: colors may fade.
Do not use abrasive products.
Metal part
Dust regularly with a dry cloth.
Clean with a soft, damp cloth. Then wipe with a clean, dry cloth.
Maintain with circular movements.
Wood part
Dust regularly with a dry cloth.
Maintain with movements in the direction of the wood fibers.
Keep the label with lot number, it may be useful in case of complaint.
If you have any comments or suggestions regarding this product, assembly instructions or service received, please
enquire at your nearest store or contact us on our website at: www.habitat.eu or write to this address: HABITAT, 70
AVENUE VICTOR HUGO, 93300 AUBERVILLIERS FRANCE
Plume – 11/2019
1

Werbung

loading

Diese Anleitung auch für:

Plume 821804