Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Setup the Connection between the Receiver and the Mouse
1.
Plug the Nano receiver into the USB port of your computer.
2.
Insert the batteries into the mouse, then follow the steps below.
3.
If the mouse is not working, please put it into pairing mode.
4.
Pairing: Re-plug the Nano receiver into the USB port of your computer. If the mouse does
not work after 10 seconds, then press the connect buttons on the mouse.
(Nano receiver has auto pairing function).
5.
The LED indicator on mouse flashes steadily when it is in pairing mode and stops blinking
when it is successfully paired with the receiver. The mouse remains off afterwards.
6.
When the battery is low, the Low Power indicator blinking.
7.
Please see the included software on CD for details.
13
Version 1.0 (2008/10/31) ● © 2008 by MaxPoint Handelsges. mbH
... touch the difference
Werbung
Inhaltsverzeichnis
