Herunterladen Inhalt Inhalt Diese Seite drucken

Device Access (Push-To-Open); Moving Forward; Gerätezugriff (Push-To-Open); Heraus Bewegen - Seh Rmk4 Hardwareinstallationshandbuch

Inhaltsverzeichnis
 Device Access
(Push-to-Open)
The RMK4 comes with a push opener.
If you have installed the device
moveably
('Option
 
Installation'
be moved forwards to protrude a bit
from the installation frame and then
back again with this push-to-open
technology.
Important:
The device moves in
guiding rails within the
RMK4.
You cannot remove the
device completely!
In the protruding position, the device
can be accessed more easily, e.g. for
connecting USB dongles or TSE-
Modules.
Important:
Only move the device
forward temporarily.
For
connecting USB dongles
respectively TSE modules
or maintenance.

Moving Forward

1. Gently press down in the middle
of the device.
The push opener opens with a
hearable clicking noise and the
device automatically moves
forward for about 1 cm.
2. Pull the device forward into the
desired position.
3. Now you can perform the desired
work at the device.
After you have completed your
work at the device, move it back
24
1:
Movable
12), the device can
example,
for
 Gerätezugriff
(Push-to-Open)
Das RMK4 verfügt über einen
Drucköffner. Wenn Sie das Gerät
beweglich
eingebaut
('Variante 1: beweglicher Einbau'
12), kann das Gerät über diese
Push-to-Open-Technik
dem Einbaurahmen nach vorne
heraus und wieder hinein bewegt
werden.
Wichtig:
Das Gerät Pro wird im
RMK4
Führungsschienen
bewegt.
Eine
nahme des Gerätes ist
nicht möglich!
In der herausstehenden Position
kann
einfacher
zugegriffen werden, z.B. um USB-
Dongles
oder
anzuschließen.
Wichtig:
Bewegen Sie das Gerät
nur temporär nach vorne.
Beispielsweise
Anschluss
Dongles
Modulen
Wartungsarbeiten.

Heraus bewegen

1. Drücken Sie sanft und mittig auf
das Gerät.
Der Drucköffner öffnet mit einem
hörbaren Klickgeräusch und das
Gerät bewegt sich automatisch
circa 1 cm nach vorne.
2. Ziehen Sie das Gerät in die
Hardware Installation Guide
haben
etwas
aus
innerhalb
von
vollständige
Ent-
auf
das
Gerät
TSE-Module
für
den
von
USB-
bzw.
TSE-
und
für
Inhaltsverzeichnis
loading

Inhaltsverzeichnis