Inhaltsverzeichnis
Werbung
IV) COPYING OF MP3/WMA FILE
IF PUTTING A MP3/WMA DISC INSTEAD OF A CD-DISC, THE SYSTEM WILL COPY THE FILES TO THE USB OR
SD/MMC CARD IF PRESS THE " RECORD " BUTTON (9). THE OPERATION PROCEDURES IS SAME AS CD
ENCODING AS STIPULATE ON ABOVE, AND THE SYSTEM WILL SWITCH TO COPYING MODE ONLY IF
MP3/WMA FILE BEING READ.
REMARK:
-
THE SYSTEM WILL STORE THE FILE TO USB SORCE FIRST IF BOTH USB AND SD SLOT ARE BEING
OCCUPLIED BY STORAGE MEDIA.
-
IF PRESS THE " RECORD " BUTTON DURING PLAYBACK OF USB OR SD SOURCE, THE FILE WILL COPY
FROM USB TO SD OR SD TO USB.
B) PHONO ENCODING
1)
SET THE FUNCTION BUTTON TO " PHONO " MODE AND THEN PRESS THE " RECORD " BUTTON (9)
DIRECTLY.
2)
THE LCD DISPLAY WITH SHOW THE WORD "
" & "
" AND FLASHING AFTER FEW SECONDS. NOW THE SYSTEM IS STARTING THE ENCODING
MODE.
3)
START PLAYBACK AT PHONO FOR THE TRACK WHICH YOU WANT TO RECORD TO USB.
4)
AFTER FINISH OF RECODING, PRESS AND HOLD THE " RECORD " BUTTON (9) UNTIL THE LCD STOP
FLASHING AND RETURN TO " PHONO " MODE.
C) ENCODING BITRATE (BY REMOTE HANDSET)
YOU CAN SELECT THE DESIRED BITRATE DURING ENCODING FROM CD OR PHONO TO USB, THE
SELECTABLE RANGE FROM 32 / 64 /96 /128 / 192 / 256 KBPS.
1.
SET IN " PHONO " FUNCTION (15) & REMAIN STOP MODE.
2.
PRESS THE " INFO " FUNCTION AND THE LCD DISPLA WILL SHOW THE DEFAULT BITRATE (128 KBPS)
3.
PRESS SKIP
4.
PRESS AGAIN THE " INFO " TO CONFIRM THE SETTING AND THE LCD DISPLAY (18) RESUME TO
" PHONO " MODE
D) TRACK SEPARATION (BY REMOTE HANDSET ONLY)
YOU CAN DIVIDE A TRACK WHILE RECORDING FROM PHONO TO USB/SD TO SPLIT IT IN TO SEPARATE
TRACKS FOR PLAYBACK. WHILST RECORDING FROM PHONO PRESS THE "
BUTTON ONCE ON THE REMOTE HANDSET, THIS WILL MARK THE END OF THE OLD TRACK AND CONTINUE
RECORDING, BUT NOW AS A NEW TRACK.. THE TEXT " PHONO " WILL FLASH ONCE ON THE LCD DISPLAY TO
SHOW A NEW TRACK HAS BEEN CREATED SUCCESSFULLY. THIS IS ONLY FOR USE WHILST RECORDING
AND NOT DURING PLAYBACK OF PRE-RECORDED FILES.
FILE DELETE AT USB / SD CARD (BY REMOTE CONTROL)
THE SYSTEM IS ABLE TO ERASE THE FILE STORED INSIDE THE USB PEN DRIVE OR SD CARD BY
FOLLOWING:-
A) SINGLE FILE DELETE
1 PRESET AT " USB " OR " SD " MODE.
2 PRESS AND HOLD THE " INFO " BUTTON FOR 3 SECONDS AND THE LCD DISPLAY (18) WILL SHOW (DEL
---001)
3 PRESS SKIP FORWARD
4 PRESS THE " REC " BUTTON TO ENTER " YES / NO " MODE AND THEN PRESS SKIP FORWARD
SKIP BACKWARD
5 PRESS THE " REC " BUTTON AGAIN TO CONFIRM THE SETTING.
B) ALL FILES DELETE
1. PRESET AT " USB " OR " SD " MODE.
2. PRESS AND HOLD THE " INFO " BUTTON FOR 3 SECONDS AND THE LCD DISPLAY (18) WILL SHOW (DEL
---001)
3. PRESS AND HOLD THE " INFO " BUTTON TO ENTER " YES / NO " MODE AND THEN PRESS SKIP
FORWARD
OR SKIP BACKWARD
4. PRESS THE " REC " BUTTON AGAIN TO CONFIRM THE SETTING.
REMARK :
-
ALL THE FILES INSIDE THE USB STORAGE MEDIA OR SD CARD WILL BE DELETED COMPLETELY AFTER
CONFIRMING TO " YES " MODE.
-
PRESS " STOP " BUTTON ONCE AT REMOTE HANDSET TO QUITE DELETE MODE
OR
BUTTONS (3) TO SELECT THE DESIRED BITRATE FOR ENCODING.
OR SKIP BACKWARD
TO SELECT " YES " OR " NO ".
TO SELECT " YES " OR " NO ".
USB
" AND THEN FLASHING, AND THEN DISPLAY "
BUTTON TO SELECT THE FILE GOING TO DELETE
E-5
" (TRACK SEPARATION)
OR
Werbung
Inhaltsverzeichnis
