Inhaltsverzeichnis
Werbung
Configuring wireless network in Windows® 7
Windows®
Configuration" feature, which can be used to configure and control the
NICW-U5 Bluetooth and WLAN Dongle. Note: Wireless Zero Configuration
is most appropriate to be used at home and in SOHO local networks.
Wireless Zero Configuration should not be used in medium or large
networks or in the networks where a high degree of security is required.
Follow the steps below to configure your WLAN Dongle using the
Wireless Zero Configuration:
1. From the Start menu, select Control Panel.
2. Click "Network Connections".
3. Right-click the network connection associated with your Wireless
USB Dongle and select "Properties".
4. Click the "Wireless Networks" tab.
5. Check the "Use Windows to configure my wireless network settings"
checkbox.
6. Click the "View Wireless Networks" button.
7. Select the Access Point with which you would like to connect.
8. Click the "Connect" button.
9. Enter your login/password that is required by this network.
GEMBIRD EUROPE B.V.
NICW-U5 BLUETOOTH AND WLAN DONGLE
7
operating
system
has
so-called
http://www.gembird.eu
USER MANUAL
"Wireless
Zero
7
Werbung
Inhaltsverzeichnis
