Werbung
Verfügbare Sprachen
Verfügbare Sprachen
5. Connections
See figure 3 - Block diagramm
N
1 Neutral conductor
14
4 Normally open contact 1
L
2 Input Voltage 230V AC
24
5 Normally open contact 2
13
3 Common contact (COM)
23
6 Common contact (COM)
0,2...1,5mm² fine/ single-wire
6. Operation
6.1 Operation via DeviceButton
The DeviceButton
1
has the same priority as the Casambi
APP, the last one wins.
Functions DeviceButton
Switching the relays alternately
Schaltmuster
LED
Relay 1
ON
green
Relay 1
OFF
off
Relay 2
ON
red
Relay 2
OFF
off
Relay 1 u. 2
ON
orange
Relay 1 u. 2
OFF
off
Casambi Unit ID is displayed
Display via flashing LED (in orange) as a 1 ... 3 digit number (from 1 to 255). If
the unit is not coupled to a Casambi Network, the LED flashes red.
6.2 PushButton operation via blind button
Pin 6 is a release phase to which an external standard blind
button can be connected.
IMPORTANT - Operation via APP always has priority.
As soon as a drive command is sent via the app, the
manual drive is interrupted.
8mm
6.3 Operation via Casambi
The module has a Bluetooth Casambi interface and can be ope-
rated via smartphone with the Casambi APP.
For detailed information, please consult to the document
„CSA2 UP Casambi - Manual" available for download.
For detailed information about setup and operation with Ca-
keystroke
sambi please refer to the Casambi documentation.
short press
press 3 sec.
© 2020 - maintronic® GmbH reserve the right to make technical
changes and product improvement without prior notice.
Mistakes and typing errors reserved. All rights reserved.
© 2020 - maintronic® GmbH behält sich das Recht vor, tech-
nische Änderungen und Produktverbesserungen jederzeit
ohne vorherige Ankündigung vorzunehmen.
Irrtum und Druckfehler vorbehalten.
MTC maintronic GmbH
Tel: +49 (0)9721-7766-0
Carl-Zeiss-Str. 10-14
www.maintronic.de
D-97424 Schweinfurt/Germany
support@maintronic.de
Werbung
