azaqua NANO Bedienungsanleitung

01 ENGLISH
Product Manual / Warranty
1. Package Contents
TWINSTAR IC / TWINSTAR Reactor / Adapter / Extension Cable / Suction Cups (3)
/ Reactor Bridge
2. Names of parts
Power output
terminal
Mode selection indicator
Left : mode1
Center : mode 2
Right : mode 3
Power button/
Mode selection button
Power input terminal
TWINSTAR IC
3. Turning on the Power
Pushing the Power Button will turn on the power and start the operation.
Capacity
Model
Mode 1 Mode 2
50L ~ 100L 100L ~ 200L
NANO
YOTTA 50L ~ 100L 100L ~ 200L
4. Installation
Reactor Bridge
For optimal performance, please install the Reactor below the Outflow.
Installing the Reactor in areas lacking water flow will cause reduction in performance.
1) Insert the Reactor bridge into the bottom of the Reactor according to the direction of
the arrows on the image. Do not rotate the Reactor bridge.
2) Fix the Suction cups to the Reactor bridge and attach the Reactor below 10~15 cm
from the outflow in the aquarium.
3) Fix the Suction cups to the back of the TWINSTAR IC.
4) Once the Suction cups are fixed, attach the TWINSTAR IC to an appropriate area on
the aquarium's outer wall.
5) Connect the Reactor Cable to the Power Output Terminal of the TWINSTAR IC.
6) Connect the Extension Cable to the Power Input Terminal of the TWINSTAR IC and
connect the Extension Cable to the Adapter.
7) Push the Power Button and check that it is operating normally.
5. Precautions regarding the Water Quality in Aquarium
1) Please completely remove any dust from the water for 3~5days before use.
2) Please completely remove the algae that has already occurred in the aquarium before
Installing TWINSTAR. It can not remove pre-existing algae.
Reactor
3) You must take the Reactor off from the water due to soil dust when you maintain
the aquarium or cut plant. Any dust in the water will shorten the life of the Reactor.
4) Please keep the power input/output terminal away from the water. Otherwise,
this will cause a failure in the operation of the terminal due to corrosion.
In case the terminal is exposed to water, drain as soon as possible and let it dry.
5) Do not use this Product if you have put in salt in the water for medicated bath.
6) TWINSTAR can not be together used with fish medicine.
6. Cleaning the Reactor
1) The Reactors are consumables, requiring them to be replaced during use.
You can use it more than 1 year if you use it according to the Product Manual.
Mode 3
2) If you want to clean the Reactor, first, add 20cc of sodium hypochlorite to 1,000cc
of water. Then, put the Reactor into the diluted solution for over 3 hours. Lastly,
200L ~ 250L
take out the Reactor and wipe it with a soft sponge.
You should only clean the plastic part and never clean the metal nets
200L ~ 430L
as the metal nets have special coating on them.
7. Safety Precautions
This Product is only to be used in a freshwater aquarium, and not to be used in a salt
water aquarium. Do not use this Product for any purpose other than those specified above.
1) Please read the Product Manual and use the Product according to
the instructions in this Product Manual.
2) Please ensure that there is no safety problem with the living thing
(including aquarium fish) before installing the Product.
3) Do not clean the metal nets of the Reactor.
4) Please turn on the power after the Product has been completely installed.
5) Do not put your hands into the aquarium once you have turned
on the power.
6) Do not drop the Product or apply strong force to it.
7) Please unplug the Power Cord when installing, removing, or retrieving
the Product.
8) Please unplug the Power Cord if the Product is not to be used for a long time.
9) Do not modify or disassemble the Product. Also, do not use the Product
in any manner other than those specified above.
10) Please keep the Product out of reach of children.
8. Warranty Repair and Warranty Period
For warranty service, please contact your place of purchase.
1) The warranty period is 1 year from the date of purchase (excluding the Reactor).
2) The warranty period for the Reactor is 6 months from the date of purchase and
it is possible to repurchase the Reactor.
3) This warranty does not apply where damage is caused by the Customer's mishandling.
4) The Customer must provide this Warranty Certificate to receive any services under
this warranty.
5) The Customer must also provide the label attached to the Product in order to receive
any services under this warranty. If the label is damaged, altered or removed,
the Customer cannot receive any services under this warranty.
6) Please do not lose this Warranty Certificate as it will not be reissued.
7) For repairs beyond the warranty period, please ask dealership.
This warranty does not apply if the Product is:
1) improperly repaired, modified or disassembled;
2) used for any purpose other than a freshwater aquarium;
3) used for any purpose other than an ordinary household aquarium
4) damaged by Acts of God or other external causes, including but not limited to, fire,
earthquake, fluctuation or surges of electrical power and lightning.
Date of Purchase
Place of Purchase
Customer's Name
Address / Contact Number