Preliminary Settings - Indel Webasto Marine SAFE 10 PLUS Gebrauchsanleitungen

SAFE 10/30 PLUS
ENGLISH

PRELIMINARY SETTINGS

IINITIALIZATION / RESET
This operation is required only for Safe already used and initialized. It is not necessary with new Safe, just
purchased and installed.
To reset memory, press the RESET button (see Instructions for Use chapter); after three acoustic signals
("beep") the Safe initialization has been completed and the keys and codes memorised have been cancelled.
OWNER KEY
The Owner Key is the "mother" key necessary for the configuration of the Safe and its opening in case of
emergency.
OWNER KEY (RED OR BLUE) ACTIVATION
Once the initialization has been done, put the first IB key (red or blue) on the receiver. After three acoustic
signals ("beeps") the Safe opens and the IB key becomes the Owner Key. The first electronic key resting
on the safe becomes the Owner Key (red or blue). For each Safe only one Owner Key will be set.
SAFE OPENING WITH THE OWNER KEY
Place the Owner Key on the receiver, after one acoustic signal ("beep") the Safe will open.
OWNER KEY ERASURE
Press the RESET button (see Instruction for Use chapter), after three beeps the Owner Key will be erased.
Receiver
Owner Key
or
Master Key
17
SAFE10/30_PLUS_26-05-2017