Deltafox DP - CJS 2025 Originalbetriebsanleitung Seite 25

• In the power tools, use only the bat-
teries designed for the purpose. The
use of other batteries may result in
injuries and risk of fire.
• Keep the unused battery away
from paper clips, coins, keys, nails,
screws and other small metal ob-
jects, which could cause bridging of
the contacts. A short circuit between
the battery contacts may cause burns
or fire.
• If used incorrectly, liquid may leak
from the battery. Avoid contact
with this. in the event of accidental
contact, rinse off with water. If the
liquid gets into eyes, seek medical
assistance. Leaking battery fluid may
cause skin irritations or burns.
6) SERViCE
• have your power tool serviced by
a qualified repair person using only
identical replacement parts. This will
ensure that the safety of the power
tool is maintained.
7) SPECiAL SAFETy inSTRUCTiOnS
FOR JiG SAWS
• Laser radiation warning.
Laser class 2, Pmax: <1 mW,
λ: 650 nm, EN 60825-1: 2014.
Never point the laser beam at your-
self, others or pets, and do not stare
into the laser beam, even from a
distance. This power tool generates
a laser with class 2 laser radiation
according to EN 60825-1. This can
cause blindness.
• Hold the device by the insulated grip-
ping surfaces when performing work
in which the tool may come into con-
tact with hidden wiring. Contact with
a live wire can also cause a charge in
metal parts of the device and result in
an electric shock.
• Keep hands away from the sawing
area. Do not reach underneath the
workpiece. Upon contact with the
blade there is a risk of injury.
• Move the power tool against the
workpiece only when it is turned on.
Otherwise, there is a risk of kickback if
the attachment tools jam in the work-
piece.
• Make sure that the footplate is secure
during sawing. A tilted saw blade may
break or cause a kickback.
• After you have finished work, turn the
power tool off and do not pull the saw
blade out of the cut until it has come
to a standstill. In this way you will
avoid any kickback and can safely put
down the power tool.
• Use only undamaged saw blades in
perfect condition. Bent or blunt blades
can break, adversely affect the cut or
cause kickback.
• Do not brake the saw blade after
switching the device off by applying
side pressure. The saw blade may be
damaged, break or cause a kickback.
• Use suitable detectors in order to find
hidden supply lines or consult the lo-
cal utility company. Contact with elec-
tric cables can lead to fire and electric
shock. Damage to a gas pipe can
cause an explosion. Penetration into a
water line causes property damage.
• Secure the workpiece. A workpiece
that is retained with clamping appli-
ances or a vice is held more securely
than with your hand.
• Wait until the power tool has stopped
before placing it down. The attach-
ment tools can jam and lead to a loss
of control over the power tool.
GB
25