Weber Protect Smarte WLAN Bedienungsanleitung Seite 51

Step 4:
You will now be forwarded
to the next configuration
screen.
On the next screen, click
on 'Enter The Configuration
Interface'.
You will be automatically
redirected to the WiFi
settings of your
smartphone.
Step 3:
After mounting and connecting
the video doorbell to the power
supply, the doorbell button LED
flashes red. When the red LED
flashes, click on the following
button in the app:
"THE RED LIGHT IS FLASHING".
Note: If the doorbell button LED does not
flash red, press the reset button for about
10-15 seconds until a short melody sounds
and the red LED starts to flash. Restart at
Step 1.
49