Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Assembly Instructions: Famille Garage Extension Set
8 pc. Stainless-steel rods
24 pc. Allen bolts M6 x 25mm
10 pc. Wood screws 4 x 25mm
Montieren Sie bitte wie folgt:
1.
Disassemble the entire bed.
2.
place the head- / foot-boards along with the longer bed-frame sides on the floor and fasten them with the Allen bolts provided
the bed and / or the floor from scratching. Finally, fix the legs to the bedframe sides using the Allen
3.
Put the stainless steel rods
into the holes on the bedframe height corresponding to the desired mattress height and knock the slatted-base supports onto the rods using either a
rubber mallet or a small hammer.
4.
Finally, place the slatted base on the supports, fixing it with the supplied wood screws
. If necessary, place some sheeting on the floor to prevent
bolts__mi.
.
Werbung
