Werbung
Quicklinks
Werbung
Inhaltszusammenfassung für Daume 140 A
- Seite 1 Typ 140A - 144A Motor-Regelventil page 1 Motorized Control Valve...
- Seite 2 Typ 140A - 144A Motor-Regelventil Motorized Control Valve page 2 Typ 140 A 2/2 Wege-Ventil Type 140 A 2/2 way-valve Typ 144 A 3/2 Wege-Ventil Type 144 A 3/2 way-valve Anwendung und Vorteile Application and technical characteristics motorized control valve for industrial...
- Seite 3 Typ 140A - 144A page 3 Typ 140 A Typ 144 A dimensions weight stroke speed running pressure ratio time differ. -values and characteristic curves of control valves see list no.IV. The connection dimensions (overall length and flange dimensions) are to DIN DN 16. For other DN these...
- Seite 4 Typ 140A - 144A page 4 Typ 140A Typ 144A straight-way-valve three way valve Ersatzteil-Stückliste List of spare parts Ersatzteil-Stückliste List of spare parts body thrust bearing seat sliding key seat thread spindle 3; 19 plug 3 with spindle 19 hand wheel plug gasket reversing lever...
-
Seite 5: Installation
Typ 140A - 144A page 5 Einbauhinweise Installation New pipes must be cleaned. Flow direction indicated by arrow. Valve can be mounted vertically or horizontally. In this case the adaptor plate (oblong) (18.1) and flange (157) should be on top of each other. Otherwise the actuator must be rotated by 90°. -
Seite 6: Funktionsbeschreibung
Typ 140A - 144A page 6 Funktionsbeschreibung Mode of operation A reversible motor (120) drives the spindle via tooth belt reduction gear (121, 122, 123) and encased cycloidal gear (124). The output shaft is postively connected with spindle nut (126) through engageable coupling (125).