Before First Use; Charging The Battery; Assembly; Application - Westfalia 88 54 44 Originalanleitung

Before first Use

Remove all packaging from the cleaning brush. Do not leave packaging
materials lying around; plastic bags may become deadly toys for small
children.

Charging the Battery

Before using the cleaning brush for the first time, fully charge the battery.
1. Open the charger port cap (7) and connect the charger (12) with the
unit and a wall socket.
The red LED lights up and indicates that the battery is charged.
Before first use, charge the battery for approx. 8 hours. Afterwards you
can charge the battery for approx. 6 hours.
When the battery is fully charged, the green LED lights up.
2. After charging process, disconnect the charger from the unit and close
the charger port cap tightly.

Assembly

1. Make sure the unit is switched off before assembling it.
2. Connect the main handle (6) with the brush head holder (1). When
assembling the components make sure "click" sound is heard.
3. When using the extension rod (3) make sure the three components are
securely fixed with a click sound.
4. Attach the desired brush (8, 9 or 10) onto the brush head holder (1)
and make sure it is securely fitted. Make sure the notches in the brush
head holder and the suitable dents on the brush fit together.

Application


Dome Brush (8): the perfect brush for the cleaning or areas with
different surfaces e.g. rounded areas, mountings, etc.

Flat Brush (10): Ideal for large surfaces with predominantly flat surfac-
es, such as floors, walls, etc.

Cone brush (9): suitable for gaps, corners and hard to reach spots.
Operation
13